Name: MAX318EPA
Brand: Maxim Integrated
SKU: MAX318EPA
Availability: InStock

new-10%

MAX318EPA

Manufacturer part number:MAX318EPA

Manufacturer:Maxim Integrated

Description:175ns, 145ns SPST - NO 35Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX318 8 Pins 250pA 15V 8-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:MAX318EPA Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1995
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	35Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX318
Pin Count	8
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	30V
Min Supply Voltage	10V
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Current-Max (Isup)	0.005mA
Neg Supply Voltage-Nom (Vsup)	-15V
Max Dual Supply Voltage	20V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	3pC
Channel-to-Channel Matching (ΔRon)	2 Ω (Max)
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX318EPA Product Details

MAX318EPA Overview

Packed in 8-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. There are 8 terminations totally. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 8 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NO switching circuits. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with MAX318. This digital multiplexer has 35Ohm internal resistance. Please refer to the datasheets for 8 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 30V. The lowest voltage fed to the electronic component should be 10V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 4.5V voltage if you are using dual power supply.