Name: MAX3162EAI+T
Brand: Maxim Integrated
SKU: MAX3162EAI+T
Price: 22.45000 USD
Availability: InStock

new

MAX3162EAI+T

Manufacturer part number:MAX3162EAI+T

Manufacturer:Maxim Integrated

Description:28 TerminationsMAX3162 Receivers2 Bits 2/2 Drivers/Receivers2 Functions

Case Package:SOT-23

Datasheet:MAX3162EAI+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	28-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Additional Feature	DELAYS MEASURED IN EIA-422, EIA-485 MODE
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Voltage - Supply	3V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX3162
Pin Count	28
JESD-30 Code	R-PDSO-G28
Qualification Status	Not Qualified
Power Supplies	3.3/5V
Supply Current-Max	6mA
Data Rate	10Mbps
Differential Output	NO
Protocol	RS232, RS422, RS485
Input Characteristics	SCHMITT TRIGGER
Number of Drivers/Receivers	2/2
Driver Number of Bits	2
Receiver Number of Bits	2
Duplex	Full
Receiver Hysteresis	500mV
Interface Standard	EIA-232; EIA-422; EIA-485
Receive Delay-Max	150 ns
Transmit Delay-Max	800 ns
Output Low Current-Max	0.0025A
Out Swing-Min	10 V
Height Seated (Max)	1.99mm
Length	10.2mm
Width	5.29mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX3162EAI+T Product Details

MAX3162EAI+T Overview

Designed for common LEDs, this driver IC features an enhanced 28-SSOP (0.209, 5.30mm Width) package.The Tape & Reel (TR) package houses this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 3V~5.5V.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 28 terminations integrated.ICs that are packaged with market standard pinouts are available on the market.For more variants of this part, try searching with the base part number MAX3162, which indicates the product type, temperature, package, etc.An important feature of this ic receiver was its 2-bit resolution capability.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is a subcategory named Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 3.3/5V.In addition, the optical transceiver module's DELAYS MEASURED IN EIA-422, EIA-485 MODE function improves signal management accuracy and stability overall.To power the ic receiver, sufficient current but not more than 6mA should be supplied to its VCC pin.