MAX313MJE Overview
Due to the lack of space on the board, digital switch is provided in the CDIP.Tube is the method used for packaging.As part of its basic configuration, 16 terminations are designed as a part of it.In this case, 15V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.At the end of a conductor, it uses THROUGH-HOLE as the point where the conductor ends.It is configured with 16 pins.Normally, 512/+-15V is powered by a battery.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.If the supply voltage is set to 20V, reliable performance of the multiplexers can be achieved.A resistance of 10Ohm is used to operate the signal switching.Transmission is carried out over 1 channels in the turn signal switch's circuit.The device is specified to operate at a maximum supply voltage of 30V in accordance with the applicable device specification.A minimum supply voltage of 4.5V is required to operate the digital swith.In this case, 125°C is the maximum operating temperature of the switches.In this digital switch, the analog integrated circuit is SPST.
MAX313MJE Features
Supplied in the CDIP package
Power supplies of 512/+-15V
Operating with the supply voltage of 20V
SPST as the analog IC
MAX313MJE Applications
There are a lot of Maxim Integrated MAX313MJE Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Data demultiplexing
- To select different devices in microprocessor output
- Microprocessor input/output systems
- Paper plants
- CNC machines
- Automatic health monitoring systems
- Enabling block of memory depending on address in memory chips
- Enabling different functions units in microprocessor instruction decoding
- Relay
