MAX312MJE Overview
In order to save board space, digital switch is located in the CDIP.The package is packaged in the manner of Tube.There is a design for terminating 16 as part of its basic configuration.The multiplexer is supplied with 15V voltage.A component pin count of 16 is found on this turn signal switch.THROUGH-HOLE is used as the point at which the conductors come to an end as part of this formula.The supply type of this multiplexer ic is Dual, Single.The part belongs to the Multiplexer or Switches category of signal switches.As far as the resistance is concerned, it operates with 9Ohm.The turn signal switch's circuit consists of 1 channels that are being used for transmission in the circuit.Signal switch operation at 125°C temperature is acceptable.The minimal operating temperature of the multiplexer should be maintained at -55°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 30V.Typical device specifications specify a voltage supply of 4.5V for the digital swith.IC SPST is employed as the analog part.
MAX312MJE Features
Supplied in the CDIP package
Adopting a supply type of Dual, Single
SPST as the analog IC
MAX312MJE Applications
There are a lot of Maxim Integrated MAX312MJE Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Textile mills
- RF-based home automation system
- Night vision cameras
- Medical industry
- CPU memory location identification
- Transmission from the computer system of a satellite
- Analog to digital conversion
- Make half adder
- Implementing boolean functions with multiple variables
