MAX312CUE+ Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around 0°C~70°C TA. In total, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. Based on SPST - NC switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. Try searching for the analog switch ic with MAX312 if you are looking for variants. As far as internal resistance is concerned, it has 10Ohm. The functions of 16 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 30V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 4.5V should be the lowest voltage fed to the electronic component. When the digital multiplexer is charged above 1μA, damage can occur. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. You should attach at least 4.5V voltage if you are using dual power supply. There are SEPARATE OUTPUT outputs on this analog switch ic. Operating voltages of 18V are compatible with the electrical part.
MAX312CUE+ Features
1 Channels
Switch Circuit: SPST - NC
MAX312CUE+ Applications
There are a lot of Maxim Integrated MAX312CUE+ Analog Switches & Multiplexers ICs applications.
- Optical Applications
- PBXs
- Multiplexers
- Public switching systems
- Wireless Local Loop
- Avionics and Military Systems
- New designs requiring multiplexer functions
- Battery Powered Systems
- High reliability control systems
- Transmit
