MAX3074EAPA+ Overview
This LED driver IC features an enhanced PDIP package for driving common LEDs.The receiver is packaged in a Tube package.An operating voltage range of 3.3V is suitable for this line driver ic.There are 8 pinouts available on this transceiver which are market standard.A 8-pin driver IC with enhanced power dissipation control is featured here.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.It is important to note that this ic receiver had a maximum resolution of 1 bits.Typically, the resolution of this receiver is specified to be 1 bits.An input voltage supply of 3.3V is required to operate the transceiver module.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It is important that the operating transceiver module's temperature is below 125°C.This optical transceiver must not be operated at a temperature below -40°C when it is at its minimum operating temperature.In telecommunications, transmitters generate radio waves in order to transmit or send data through an antenna to transmit or send data using radio waves.A supply voltage of less than 3.63V is recommended for this transceiver module according to its manufacturer.
MAX3074EAPA+ Features
Tube package
8 pin count
8 pins
MAX3074EAPA+ Applications
There are a lot of Maxim Integrated MAX3074EAPA+ Drivers/Receivers/Transceivers applications.
- Aircraft positioning
- WDM transmission
- 1x/2x Fiber Channel
- Bridges
- Cable network front end
- Broadcast application
- Cell phones
- SONET/SDH Network
- Precision geodetic measurement
- Changeing the frequency from IF to RF
