MAX296EPA+ Overview
Packaged in a 8-DIP (0.300, 7.62mm) package, it is easy to install.Packaged in a Tube format, it is a very good product.In the case of this gadget, the mounting type is Through Hole.The filter type for this part is Bessel, Low Pass Switched Capacitor.With a power source of 4.75V~11V ±2.375V~5.5V, it should work.8-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the MAX296.In terms of frequency, it is at a cutoff or center frequency of 50kHz.As the reflow temperature reaches 260, it reaches its peak.During all periods of operation, 5V is used as a source of power for the component.At 5.5V, the maximum supply voltage (Vsup) is reached and the circuit is completed.As soon as you start the machine, it should be warmer than -40°C.In the current state of affairs, 85°C represents the maximum working temperature.Filter is important to remember that 8 is the pin number of the component.A device with +-5V supplies is being used.As you can see from the picture, there are a number of 8 terminals on the device.A greater voltage must be supplied, Vsup, than the voltage consumed, 2.375V.In 1 circuits, there are various types of circuits.Depending on the model, the maximum supply temperature can be raised to 22mA.This is one of a number of Through Hole mount packages that are included with the package.As far as the part type is concerned, it is of the Active type.
MAX296EPA+ Features
Supply voltage of 5V
Maximum operating temperature of 85°C
1 circuits
Mount of Through Hole
MAX296EPA+ Applications
There are a lot of Maxim Integrated
MAX296EPA+ active filters applications.
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
- Very Narrow Band Fllters
- Zoom Spectral Analysis
