MAX293EPA+ Overview
There is a 8-DIP (0.300, 7.62mm) package for it.In a Tube package, it is available.This gadget is mounted using the Through Hole mounting type.Its filter type is Elliptic, Low Pass Switched Capacitor.Filter should be able to operate wFilterh a power source of 4.75V~11V ±2.375V~5.5V.Total pin count is 8.Having a MAX293 in the component makes the device the best.The device is at the 25kHz frequency, either in the cutoff or in the center.During reflow, the peak temperature reaches 260.Components are powered by a 5V source at all times.As soon as it begins to operate, it should be warmer than -40°C.85°C is currently the maximum working temperature.In this case, 8 refers to the component's pin number.8 terminals are found on the device.1 circuits are present.As far as the supply temperature is concerned, it is capable of handling up to 22mA degrees.DC DC switching regulators operate with a supply voltage of 5V.There is no loss of accuracy at 35kHz frequency.
MAX293EPA+ Features
Supply voltage of 5V
Maximum operating temperature of 85°C
1 circuits
35kHz frequency
MAX293EPA+ Applications
There are a lot of Maxim Integrated
MAX293EPA+ active filters applications.
- Real Time Video Filters
- 1-D and 2-D FIR Filters
- Radar/Sonar
- Adaptive Filters
- Echo Cancellation
- Complex Multiply-Add
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
