MAX274AENG+ Overview
In a 24-DIP (0.300, 7.62mm) package, it is packaged.A Tube package contains it.Using Through Hole mounting, the gadget can be mounted.There is a filter type Continuous, Band Pass Low Pass associated with this part.This device should work with a power source of 4.74V~11V ±2.37V~5.5V.Filter consists of a total of 24 pins.In the device's best component, there is a MAX274.Cutoff or center frequency is 150kHz for the device.When 260 is reached, the peak reflow temperature has been reached.In order to power the component at all times, a source of 5V is required.This is the figure of the filters.Filter is at 5.5V that the maximum supply voltage (Vsup) reaches Filters maximum value.As it operates, it should be warmer than -40°C.The maximum working temperature at the moment is 85°C.Filter is still possible to distinguish the component by Filters pin number 24.A +-5V supply is present in the device.Vsup must be greater than 2.37V for the supply voltage.A maximum supply temperature of 30mA is capable of being handled by this device.The Through Hole mount comes with one that is included in the package.To mention just a few of the other features, there is IT CAN ALSO BE OPERATED FROM A SINGLE 5V SUPPLY as well.
MAX274AENG+ Features
Supply voltage of 5V
Maximum operating temperature of 85°C
Mount of Through Hole
MAX274AENG+ Applications
There are a lot of Maxim Integrated
MAX274AENG+ active filters applications.
- Radar/Sonar
- Adaptive Filters
- Echo Cancellation
- Complex Multiply-Add
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
