Name: MAX235EPG
Brand: Maxim Integrated
SKU: MAX235EPG
Price: 16.01000 USD
Availability: InStock

new

MAX235EPG

Manufacturer part number:MAX235EPG

Manufacturer:Maxim Integrated

Description:24 TerminationsMAX235 Receivers5 Bits 5/5 Drivers/Receivers5 Functions

Case Package:SOT-23

Datasheet:MAX235EPG Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	24-DIP (0.600, 15.24mm)
Surface Mount	NO
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2006
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Tin/Lead (Sn/Pb)
Additional Feature	TRISTATABLE RECEIVERS
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	5
Supply Voltage	5V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	20
Base Part Number	MAX235
Pin Count	24
JESD-30 Code	R-PDIP-T24
Qualification Status	Not Qualified
Power Supplies	5V
Supply Current-Max	15mA
Data Rate	120Kbps
Output Characteristics	3-STATE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS232
Input Characteristics	SCHMITT TRIGGER
Number of Drivers/Receivers	5/5
Driver Number of Bits	5
Receiver Number of Bits	5
Duplex	Full
Receiver Hysteresis	500mV
Interface Standard	EIA-232-E; TIA-232-E; V.28; V.24
Receive Delay-Max	10000 ns
Transmit Delay-Max	10000 ns
Output Low Current-Max	0.0016A
Out Swing-Min	10 V
Height Seated (Max)	5.08mm
Length	31.75mm
Width	15.24mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX235EPG Product Details

MAX235EPG Overview

Due to the enhanced 24-DIP (0.600, 15.24mm) package, this driver IC is excellent for driving common LEDs.Tube package is used to mount this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.Up to 5/5 receivers/drivers can be installed simultaneously on this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.In order to drive and receive signals from data, this wide receiver has 24 terminations integrated.It is packaged with 24 pinouts that are market standard for this particular transceiver.This part number MAX235 can be used to search for more variants based on the product type, temperature, package, etc.As a result of the ic receiver, the resolution of the driver was increased to 5 bits.In the case of this receiver, a resolution of 5 bits is typically specified.Line Driver or Receivers is a subcategory of this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.In addition, the optical transceiver module incorporates a TRISTATABLE RECEIVERS function that improves the overall stability and accuracy of the signal management.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 15mA.