Name: MAX218EPP
Brand: Maxim Integrated
SKU: MAX218EPP
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	20-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1995
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Tin/Lead (Sn/Pb)
Additional Feature	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	1.8V~4.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	2.54mm
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	20
Base Part Number	MAX218
Pin Count	20
JESD-30 Code	R-PDIP-T20
Qualification Status	Not Qualified
Power Supplies	3V
Supply Current-Max	3mA
Data Rate	120Kbps
Output Characteristics	3-STATE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS232
Input Characteristics	SCHMITT TRIGGER
Number of Drivers/Receivers	2/2
Driver Number of Bits	2
Receiver Number of Bits	2
Duplex	Full
Receiver Hysteresis	100mV
Interface Standard	EIA-232-E; V.24; V.28; EIA-562
Receive Delay-Max	700 ns
Transmit Delay-Max	2700 ns
Output Low Current-Max	0.001A
Out Swing-Min	5 V
Height Seated (Max)	4.572mm
Length	26.16mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant

MAX218EPP Product Details

MAX218EPP Overview

LED drivers benefit from this IC's enhanced 20-DIP (0.300, 7.62mm) package.In the Tube package, this receiver is mounted.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.Power supply requirements for this differential driver are 1.8V~4.25V.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a supply voltage range of 3V, this line driver ic operates efficiently.20 terminations are integrated into this wide receiver for driving and receiving signals from data.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.Since the part number MAX218 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.In terms of resolution, this ic receiver was capable of providing a 2-bit resolution.There is usually a 2-bit resolution specified for this receiver when it is used.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.There is one driver IC that is designed to operate from a 3V power supply, and only one driver IC in total.In addition, the optical transceiver module incorporates a 2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function that improves the overall stability and accuracy of the signal management.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 3mA.