Name: MAX211EEAI+T
Brand: Maxim Integrated
SKU: MAX211EEAI+T
Price: 8.81000 USD
Availability: InStock

new

MAX211EEAI+T

Manufacturer part number:MAX211EEAI+T

Manufacturer:Maxim Integrated

Description:28 TerminationsMAX211 Receivers4 Bits 4/5 Drivers/Receivers4 Functions

Case Package:SOT-23

Datasheet:MAX211EEAI+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	28-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Additional Feature	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX211
Pin Count	28
JESD-30 Code	R-PDSO-G28
Qualification Status	Not Qualified
Power Supplies	5V
Supply Current-Max	20mA
Data Rate	120Kbps
Output Characteristics	3-STATE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS232
Input Characteristics	SCHMITT TRIGGER
Number of Drivers/Receivers	4/5
Driver Number of Bits	4
Receiver Number of Bits	5
Duplex	Full
Receiver Hysteresis	500mV
Interface Standard	EIA-232-E; TIA-232-E; V.28
Receive Delay-Max	10000 ns
Output Low Current-Max	0.0016A
Out Swing-Min	10 V
Height Seated (Max)	1.99mm
Length	10.2mm
Width	5.29mm
RoHS Status	ROHS3 Compliant

MAX211EEAI+T Product Details

MAX211EEAI+T Overview

This driver chip is excellent for driving common LEDs due to its enhanced 28-SSOP (0.209, 5.30mm Width) package.Tape & Reel (TR) package is used for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.5V~5.5V.During operation, this electronic part may have up to 4/5 eligible receivers/drivers.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Wide receiver can operate within the range of 5V supply voltages efficiently.Integrated into this wide receiver are 28 terminations that are used for driving and receiving signals from data.This transceiver is packaged with 28 market standard pinoutsThe base part number MAX211 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An important feature of this ic receiver was its 4-bit resolution capability.It is typical for this receiver to have a resolution of 5 bits when it is specified.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.This optical transceiver module also features the TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP function, improving the overall signal management stability and accuracy.There should be enough current supplied to the VCC pin of the part, but not more than 20mA.