MAX208EWG+T Overview
The Tape & Reel package contains this receiver.With a voltage range of 5V, this driver IC can operate efficiently.This wide receiver has 24 terminations for driving and receiving data signals.There are 24 pinouts available on this transceiver which are market standard.In terms of resolution, this ic receiver was capable of providing a 4-bit resolution.There is typically a resolution of 4 bits specified with this receiver.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.Additionally, the optical transceiver module's EXTERNAL CHARGE PUMP function provides improved signal management accuracy and stability.Enough but no exceeding 20mA of input current should be supplied to the VCC pin of the ic receiver.A LINE DRIVER interface IC controls and manages the sharing of information between devices with ic receiver.Driver ICs aren't allowed to operate above 85°C.The manufacturer recommends a supply voltage below 5.5V for this transceiver module.It needs at least 4.5V of voltage to run.It is recommended to keep the operating temperature above -40°C.
MAX208EWG+T Features
Tape & Reel package
24 pin count
5V power supply
MAX208EWG+T Applications
There are a lot of Maxim Integrated MAX208EWG+T Drivers/Receivers/Transceivers applications.
- Satellite radio receiver
- Satellite ground stations
- Wireless projection application for business talks
- Remote controls
- Servers
- Vehicle
- Low power, low voltage systems
- Single fiber bidirectional application
- Home theater wiring-free
- Thermal management
