MAX1993ETG+ Overview
It comes in a 24-WFQFN Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~5.5V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 200kHz 300kHz 450kHz 600kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at QUAD . A variety of 24 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. MAX1993 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 24 pins. Switching converter is a special type of Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5.5V. You should note down the dc dc regulator's usual output current of 3A when you start a project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 600kHz. As a result, DC to DC voltage regulator has a value of CAN ALSO OPERATE IN PFM MODE so that the need can be met more directly. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 28V. Quick-PWM™ is a series of dc to dc voltage regulator. It runs on a 1mA supply current.
MAX1993ETG+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 450kHz 600kHz
Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
CAN ALSO OPERATE IN PFM MODE
MAX1993ETG+ Applications
There are a lot of Maxim Integrated
MAX1993ETG+ DC to DC converter applications.
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
