MAX16818ETI+ Overview
On the board, there is also a 28-WFQFN Exposed Pad package that saves space.It has 1 outputs for LED drivers.The mounting method is Surface Mount.As a DC DC Controller, it has high efficiency and reliability.The led light driver operates normally at -40°C~85°C TA. A number of benefits are available to Backlight.Based on the frequency of 125kHz~1.5MHz, it operates on the basis of a pulse.It operates with 28 terminations.The base is configured with 28 pins.There may be undetermined failures if the voltage supply falls below 4.75V.It is estimated that there are 1 segments.Surface Mount is mounted in the way.Part number MAX16818 represents this LED driver.28 pins are on the device.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.The minimal input voltage is 7V.In the case of supply current, there is a maximum value of 28V.When the maximum supply current is less than 5.5mA, the device is able to provide a high level of efficiency.The load is capable of receiving 30A current.In order to power systems, 28V voltage is needed.As long as the switching frequency is maintained at 1.5MHz, this electronic component is able to perform all of its functions properly.Currently, it is generating 5.3V voltage.
MAX16818ETI+ Features
Available in the 28-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 125kHz~1.5MHz
Supply voltage of 5V
Operating with the supply voltage of 28V
Switching frequency of 1.5MHz
Output voltage of 5.3V
MAX16818ETI+ Applications
There are a lot of Maxim Integrated MAX16818ETI+ LED Driver ICs applications.
- Linear fluorescent
- LED Lightings for Inspection Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Constant Voltage Power Source for portable equipment
- Flicker-free LED Lighting using R1580N
- Down lighting
- LED Lighting PFCs, Linear Dimmable
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- General lighting
- Architectural lighting
