MAX16814AUP+ Overview
In order to save board space, the led driver uses the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package. A LED driver with 4 outputs is designed.Surface Mount is used for mounting.In this case, the result is a DC DC Controller with high efficiency.LED drivers capable of operating at -40°C~125°C TA can be used.Backlight, Lighting has considerable advantages.Frequency 200kHz~2MHz is the basis of operation.It is designed to work with 20 terminations.There are 20 pins used to form the base of its configuration.Based on our estimates, there are 4 segments.On the Surface Mount, a device is mounted.There is a base part number MAX16814 for this LED driver.The device has 20 pins.As a result, it can also be classified as Display Drivers.With a minimum input voltage of 4.75V volts, it can operate.Supply current is limited to 40V at its maximum value.Whenever the supply current is lower than 2.5mA, it can provide high efficiency.The load is capable of receiving 2A current.It is necessary to power systems with a voltage of 40VThis electronic component can fully perform when the switching frequency is 2MHz.This device has a voltage output of 40V volts.
MAX16814AUP+ Features
Available in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 200kHz~2MHz
Supply voltage of 12V
Operating with the supply voltage of 40V
Switching frequency of 2MHz
Output voltage of 40V
MAX16814AUP+ Applications
There are a lot of Maxim Integrated MAX16814AUP+ LED Driver ICs applications.
- Portable lighting
- Amusement Machines
- Refrigeration lighting
- Other Electronic Devices
- Dimmable LED for vehicle interiors
- Linear fluorescent
- Gallery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Industrial Equipment
- Panel lighting
