MAX16809ATU+ Overview
There is also a 38-WFQFN Exposed Pad package that is used to save space on the board. LED drivers use 16 outputs for their design.In order to mount the led light driver, Surface Mount is used.In this case, the DC DC Controller emerges as highly efficient and reliable.The LED driver is capable of operating at a temperature of -40°C~125°C TA.The benefits are considerable for Backlight, Lighting.As a result, it operates based on the frequency of 20kHz~1MHz.For its operation, terminations with a value of 0 are used.To form its configuration, 38 pins are used.Failures may occur if the voltage supply is below 8V.16 segments exist.The mount is in the way of Surface Mount.LED drivers are found under the base part number MAX16809.This device has an output voltage of 36V volts.A total of 38 pins are present on this device.This device is optimized to deliver a maximum voltage level of 26.5V.As a result, its characteristics can also be categorized as Display Drivers.As long as the supply current is less than 5mA, this device can provide high efficiency.You can supply 880mA current to the load.The power of systems depends on having 5.5V voltages inside.
MAX16809ATU+ Features
Available in the 38-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 20kHz~1MHz
Supply voltage of 5V
Operating with the supply voltage of 5.5V
MAX16809ATU+ Applications
There are a lot of Maxim Integrated MAX16809ATU+ LED Driver ICs applications.
- Gallery lighting
- Stage Lighting and Signage
- Refrigeration lighting
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Street lighting
- Museum lighting
