MAX16061ETP+ Overview
As you can see, this power management is mounted through 20 terminals. This power ic is packaged in a way that looks like a Tube. In this IC power you will find 1 functions for you to refer to. Power management consists of 6 channels, each of which can be used independently. In this IC management you will find 20-WFQFN Exposed Pad functions for you to refer to. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. When 3.3V is applied to the power ic, it conducts. When 6 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 20 pins are present in total in this power management. Pin count of the power management is 20. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 50μA. Additionally, IC management are a variety of features, for example [0], to name a few. To find similar IC managements from the manufacturer, you can always search by MAX16061. It is necessary to have 2.5/5V volts of power in order for this voltage supervisor to operate.
MAX16061ETP+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16061ETP+ Applications
There are a lot of Maxim Integrated MAX16061ETP+ Voltage Supervisors applications.
- Radio
- Telecommunications equipment
- Battery-powered equipment
- Stable power system
- Important electronics for automotive protection
- Military communications
- Low voltage/high power - AI, GPU
- Detection of phase loss
- Solar power charger
- Magnetic resonance imaging
