MAX16059ATT30+T Overview
It is mounted through 6 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes 6-WDFN Exposed Pad functions for your convenience. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When 3.3V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 6 pins on the board. 6 pins are present on the power management system. IC management can only work with a supply voltage of 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 142nA volt supply current. As well as this, there are other features to mention such as [0], for example. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16059, which is the base power ics number.
MAX16059ATT30+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
142nA operating supply current
MAX16059ATT30+T Applications
There are a lot of Maxim Integrated MAX16059ATT30+T Voltage Supervisors applications.
- Important electronics for automotive safety
- Analog circuit
- Battery-powered equipment
- Kitchen appliances
- Computer applications
- Battery cars
- FPGA design
- Electronics installed in the vehicle
- Multi-voltage system
- Satellite navigation
