MAX16059ATT16+T Overview
Power management is mounted through 6 terminals. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached 6-WDFN Exposed Pad functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The supervisor is always powered by a 1.8V volt supply. In a 1 supply voltage, the PMIC chip conducts. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. The pins of the power management system count 6. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. A similar IC managements number of the manufacturer can always be found by using MAX16059, the base power ics number.
MAX16059ATT16+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
MAX16059ATT16+T Applications
There are a lot of Maxim Integrated MAX16059ATT16+T Voltage Supervisors applications.
- Leakage protection
- Computer applications
- Functional modules
- Important electronics for automotive protection
- Magnetic resonance imaging
- Precision measurement
- Electric heating appliances
- Smart meter
- Kitchen appliances
- Telecommunications equipment
