MAX16057ATT18+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 6-WDFN Exposed Pad functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. When 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 6 pins that are attached to IC management. Pin count of the power management is 6. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. To find similar IC managements from the manufacturer, you can always search by MAX16057.
MAX16057ATT18+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
MAX16057ATT18+T Applications
There are a lot of Maxim Integrated MAX16057ATT18+T Voltage Supervisors applications.
- Embedded computing
- Urban rail transit weak current power monitoring
- Automotive power systems
- Computer applications
- Microprocessor system
- Digitally controlled LDO regulators circuit
- Detection of phase loss
- Detection of phase imbalance
- Battery cars
- Automotive permanent magnet synchronous motors
