MAX16034LLB31+T Overview
It is mounted through 10 terminals on the power management. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find 10-WFDFN functions for you to refer to. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. A total of 10 pins are located on this power management. There are 10 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 22μA. A similar IC managements number of the manufacturer can always be found by using MAX16034, the base power ics number. The power management must be powered by 2.5/5V volts to function properly.
MAX16034LLB31+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current
MAX16034LLB31+T Applications
There are a lot of Maxim Integrated MAX16034LLB31+T Voltage Supervisors applications.
- Battery-powered equipment
- Insulation fault location system
- Network equipment
- emergency room
- Analog circuit
- Display equipment
- Military electronics
- Medical-specific isolation transformer
- Consumer electronics
- Personal computers
