MAX16033PLB46+T Overview
This power management consists of 10 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 10-WFDFN package. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 10 pins on power management. 10 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supply current of the power management is 22μA. For similar manage ics search of the manufacturer, you can always refer to MAX16033, the base PMIC number. To operate this power management, you will need at least 2.5/5V volts of power.
MAX16033PLB46+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current
MAX16033PLB46+T Applications
There are a lot of Maxim Integrated MAX16033PLB46+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Precision measurement
- Electric heating appliances
- Detection of phase loss
- Network equipment
- Radar
- Power distribution systems of ICU
- Important electronics for automotive protection
- Efficient information transmission
- Electronics installed in the vehicle
