MAX16033LLB31+T Overview
There are 10 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 10-WFDFN functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 10 pins on power management. There are 10 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 22μA. To find similar IC managements from the manufacturer, you can always search by MAX16033. To be able to work, this power management requires 2.5/5V volts of power.
MAX16033LLB31+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current
MAX16033LLB31+T Applications
There are a lot of Maxim Integrated MAX16033LLB31+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Solar power charger
- Power distribution systems of ICU
- Electric heating appliances
- Medical-specific insulation monitor
- Dash board
- Unattended substation automation
- Battery cars
- Military electronics
- DSP
