MAX16021LTEL+T Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are 16-WQFN Exposed Pad functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. A supply voltage of 1.62V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 16 pins on IC management. This power management system has 16 pins. It is recommended that Vsup should not be less than 0V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using MAX16021, the base power ics number.
MAX16021LTEL+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
MAX16021LTEL+T Applications
There are a lot of Maxim Integrated MAX16021LTEL+T Voltage Supervisors applications.
- Medical-specific insulation monitor
- Automotive power systems
- Utility meter
- Transformer load monitoring equipment
- Household appliances
- Rechargeable batteries
- Military electronics
- Network equipment
- Leakage current detection
- FPGA design
