MAX15026BETD+TC91 Overview
For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. The 14 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. There are only 14 pins on switching converter. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 23.8V volts. Considering the dc to dc regulator can only accept 28V input voltage, it is important to take note of this. In most cases, the dc dc regulator's output current is 4A. This information should be noted when you begin working with the component. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V is used to better suit the DC to DC voltage regulator's situation. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V. Ideally, dc regulator should be kept at a temperature of -40°C or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. Switch converter has 1 total function(s). 2400kHz is the highest frequency at which the switching controller can switch.
MAX15026BETD+TC91 Features
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V
MAX15026BETD+TC91 Applications
There are a lot of Maxim Integrated MAX15026BETD+TC91 DC to DC converter applications.
- Die casting equipment
- Remotely powered electric motors
- Thermal power
- Plate bending machines
- Surge protection circuits
- Imported equipment
- Electrical power transmission
- Game consoles
- Various CNC machine tools
- Terrestrial set-top boxes
