Name: MAX1482EPD+
Brand: Maxim Integrated
SKU: MAX1482EPD+
Price: 6.19000 USD
Availability: InStock

new-10%

MAX1482EPD+

Manufacturer part number:MAX1482EPD+

Manufacturer:Maxim Integrated

Description:14 Terminations5V 14 Pin MAX1482 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Case Package:SOT-23

Datasheet:MAX1482EPD+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Subcategory	Line Driver or Receivers
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX1482
Pin Count	14
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Nominal Supply Current	35μA
Data Rate	250kbps
Output Characteristics	3-STATE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	75mV
Number of Transceivers	1
Receive Delay-Max	2250 ns
Simplex/Duplex	Full Duplex
Transmit Delay-Max	2000 ns
Output Low Current-Max	0.004A
Out Swing-Min	5 V
Height Seated (Max)	4.572mm
Width	7.62mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX1482EPD+ Product Details

MAX1482EPD+ Overview

The enhanced 14-DIP (0.300, 7.62mm) package makes it an excellent LED driver.Tube package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Through Hole-type PCB or development board, you can install this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.Wide receiver can operate within the range of 5V supply voltages efficiently.This wide receiver has 14 terminations for driving and receiving data signals.This transceiver is packaged with 14 market standard pinoutsYou can search with MAX1482 to get more variants of this part, since it identifies the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 14-pin.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.Typically, the resolution of this receiver is specified to be 1 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.It implements 1 transceivers in total.