MAX1406EWE+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 16-SOIC (0.295, 7.50mm Width) package.The Tube package contains this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 4.5V~5.5V.Up to 3/3 receivers/drivers can be installed simultaneously on this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 16 market standard pinouts is provided with this integrated circuit.Since the base part number MAX1406 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation driver IC with 16 pins.In this ic receiver, the resolution was able to be set to a maximum of 3 bits.There is usually a 3-bit resolution specified for this receiver when it is used.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It is designed so that it can be operated from a 5+-10.8/+-13.2V power supply with this driver IC.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 1mA.
MAX1406EWE+ Features
Tube package
16 pin count
16 pins
5+-10.8/+-13.2V power supply
MAX1406EWE+ Applications
There are a lot of Maxim Integrated MAX1406EWE+ Drivers/Receivers/Transceivers applications.
- Precision geodetic measurement
- Satellite communications networks
- Low power, low voltage systems
- Cell phones
- Gigabit Ethernet
- IP cameras
- Wireless smart house
- Wireless security systems
- IPTV front end
- Remote controls
