MAX1361EUB+ Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 94.4k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to MAX1361 family.Supply types can be categorized by Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2.7V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 2mW.The conversion rate of this electrical AD converter is calculated as 150 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. Selectable Address can be ensured when operating.ANALOG CIRCUIT is the analog IC that this device employs.
MAX1361EUB+ Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.7V
MAX1361EUB+ Applications
There are a lot of Maxim Integrated MAX1361EUB+ ADC applications.
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Broadband data applications
- High Speed Data Acquisition for PCs
- Micro and pico cell systems, software radios
- Spectrum Analysis
- Industrial Process Control
- CMOS Image sensors for mobile applications
- Cell Phones
- Digital Storage Oscilloscope
- AC motor control
