Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX13444EASA+

MAX13444EASA+

MAX13444EASA+

Maxim Integrated

8 Terminations5V 8 Pin MAX13444 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

MAX13444EASA+ Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 6 Weeks
Contact PlatingTin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 506.605978mg
Operating Temperature-40°C~125°C
PackagingTube
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part StatusActive
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Transceiver
Subcategory Line Driver or Receivers
Technology BICMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX13444
Pin Count8
Operating Supply Voltage5V
Power Supplies5V
Operating Supply Current 30mA
Propagation Delay50 ns
Data Rate250kbps
Differential OutputYES
Protocol RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 1
Duplex Half
Receiver Hysteresis25mV
Number of Transceivers 1
ESD Protection Yes
Receive Delay-Max 2000 ns
Transmit Delay-Max 2000 ns
Length 4.9mm
Width 3.9mm
Radiation HardeningNo
REACH SVHC Unknown
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:894 items

Pricing & Ordering

QuantityUnit PriceExt. Price
1$4.12000$4.12
10$3.71700$37.17
25$3.54440$88.61
100$3.19200$319.2

MAX13444EASA+ Product Details

MAX13444EASA+ Overview


Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 4.75V~5.25V for power supply.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.The operating temperature of this ic receiver is -40°C~125°C. It is primarily designed for applications with low temperatures.This line driver ic can operate efficiently with a supply voltage range of 5V.8 terminations are integrated into this wide receiver for driving and receiving signals from data.This transceiver is packaged with 8 market standard pinoutsWith the part number MAX13444 identifying the product type, temperature, package, etc., you can search with it to see more variants.The driver IC has improved power dissipation control.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.There is a 5V input voltage supply that can be used to operate this transceiver module.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.Transceivers implemented by this IC total 1 in total.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 30mA.

MAX13444EASA+ Features


Tube package
8 pin count
8 pins
5V power supply

MAX13444EASA+ Applications


There are a lot of Maxim Integrated MAX13444EASA+ Drivers/Receivers/Transceivers applications.

  • Cable network front end
  • Wireless showroom
  • Satellite communications networks
  • Metro access rings
  • Telecom applications
  • Wireless access points
  • Precision engineering measurement
  • interconnection between computers
  • Mainframes, workstations or storage devices
  • Datacom networking applications

Get Subscriber

Enter Your Email Address, Get the Latest News