Name: MAX13235EETP+
Brand: Maxim Integrated
SKU: MAX13235EETP+
Price: 10.92000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	20-WQFN Exposed Pad
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Tin (Sn)
HTS Code	8542.39.00.01
Subcategory	Line Driver or Receivers
Technology	BICMOS
Voltage - Supply	3V~5.5V
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3.3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX13235
Pin Count	20
Qualification Status	Not Qualified
Power Supplies	3.3/5V
Supply Current-Max	1mA
Data Rate	3Mbps
Differential Output	NO
Protocol	RS232
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	2/2
Driver Number of Bits	2
Receiver Number of Bits	2
Duplex	Full
Receiver Hysteresis	500mV
Interface Standard	EIA-232; TIA-232; V.24; V.28
Receive Delay-Max	150 ns
Output Low Current-Max	0.0008A
Out Swing-Min	10 V
Height Seated (Max)	0.8mm
Length	5mm
Width	5mm
RoHS Status	ROHS3 Compliant

MAX13235EETP+ Product Details

MAX13235EETP+ Overview

With the enhanced 20-WQFN Exposed Pad package, this driver IC is excellent for driving common LEDs.Tube package is used for this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 3V~5.5V.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.In order to drive and receive signals from data, this wide receiver has 20 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.MAX13235 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 20-pin driver IC.It is important to note that this ic receiver had a maximum resolution of 2 bits.It is typical for this receiver to have a resolution of 2 bits when it is specified.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.It is designed so that it can be operated from a 3.3/5V power supply with this driver IC.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 1mA.