Name: MAX13082ECPA+
Brand: Maxim Integrated
SKU: MAX13082ECPA+
Price: 6.00000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	TIN
Subcategory	Line Driver or Receivers
Max Power Dissipation	727mW
Technology	BICMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX13082E
Pin Count	8
Output Voltage	13V
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Nominal Supply Current	1.8mA
Output Current	250mA
Propagation Delay	1.8 μs
Data Rate	250kbps
Differential Output	YES
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	100mV
Number of Transceivers	1
Receive Delay-Max	200 ns
Simplex/Duplex	Half Duplex
Out Swing-Min	2 V
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX13082ECPA+ Product Details

MAX13082ECPA+ Overview

An excellent driver IC for common LEDs thanks to its enhanced 8-DIP (0.300, 7.62mm) package.In this package, the receiver is mounted in the Tube format.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.A Through Hole-type PCB or development board can be used to place this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.MAX13082E is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control driver IC featuring 8 pins.Package size is drastically reduced by downsizing ICs and mounting them in high-density Through Hole arrays.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There is usually a 1-bit resolution specified for this receiver when it is used.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.It implements 1 transceivers in total.There is a capabilWide receivery to deliver voltage at 13V wWide receiverh this device.The output current of this bluetooth transceiver is 250mA.