MAX1232MJA Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Tube-packaging is used. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find 8-CDIP (0.300, 7.62mm) functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 240. There is a voltage supply of 4.5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Through Hole mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 8 pins on IC management. This power management system has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.5V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Through Hole mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -55°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 200μA. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using MAX1232, the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. The maximum supply temperature that PMIC chip can work with is 200μA.
MAX1232MJA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
MAX1232MJA Applications
There are a lot of Maxim Integrated MAX1232MJA Voltage Supervisors applications.
- Sensitive sensors
- Leakage protection
- DSP
- Urban rail transit weak current power monitoring
- FPGA design
- Stable power system
- Smartphones
- Detection of phase sequence
- Electronics installed in the vehicle
- Efficient information transmission
