MAX11049ETN+ Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 56-WFQFN Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 56 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The A/D converter has 4 channels.The is equipped with 56 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are A/D CONVERTER converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 56 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX11049 family.Analog, Digital is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 2.7V.The ADC converter operates from 3/55V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 3.81W.The number of channels is growing strong/weak: 8.The conversion rate of this electrical AD converter is calculated as 1 Msps.Simultaneous Sampling can be ensured when operating.
MAX11049ETN+ Features
1 Functions
56 basic kinds of terminations
56 pin count
Minimal supply voltage of 2.7V
3/55V power supplies
MAX11049ETN+ Applications
There are a lot of Maxim Integrated MAX11049ETN+ ADC applications.
- Uninterrupted Power Supplies
- Broadband data applications
- Communication test equipment
- CMOS Image sensors for mobile applications
- 4-channel data acquisition
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Data Acquisition Systems
- Medical Instrumentation and medical imaging
- Communications
- Micro and pico cell systems, software radios
