ICL7665BCPA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Please find attached 1 functions for your reference in this IC power. This power management is made up of 2 channels which are available in a series format. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 2 is used to conduct the PMIC chip. Through Hole mounts IC management. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1.6V for this PMIC. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. In this case, Through Hole is the recommended mounting type. You should set the supervisor's temperature during 0°C~70°C TA . Power management has an output of Open Drain or Open Collector during operation. A similar IC managements number of the manufacturer can always be found by using ICL7665, the base power ics number. Voltage supervisor can work with a supply temperature of 10μA at the most.
ICL7665BCPA+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.6V
ICL7665BCPA+ Applications
There are a lot of Maxim Integrated ICL7665BCPA+ Voltage Supervisors applications.
- Transformer load monitoring equipment
- Precision measurement
- DC stabilized power supply module
- Electronics installed in the vehicle
- Smart meter
- Medical-specific isolation transformer
- Power distribution systems of ICU
- Fire equipment power monitoring system
- Medical-specific insulation monitor
- Radio
