DS4311P+ Overview
[0] is the frequency of the programmable timer.It is used to pack in Tray case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 74mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes LVPECL. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: TRI-STATE; ENABLE/DISABLE FUNCTION. On operating frequency, it's available in the range of 311.04MHz. The digital timer has a frequency tolerance value of 0.005%. The number of the chip's terminations sums up to 10. Its subcategory belongs to Other Oscillators. The minimum supply voltage of the chip must not be lower than 3.135V. The supply voltage of this chip should not exceed 3.465V.
DS4311P+ Features
Operate frequency at 311.04MHz
Package / Case: Tray
Max Operating temperature at -40°C
Additional Feature: TRI-STATE; ENABLE/DISABLE FUNCTION
DS4311P+ Applications
There are a lot of Maxim Integrated DS4311P+ Programmable Timers & Oscillators applications.
- Intruder Detection
- Long Time One Shot
- Sensor Node
- Home Automation Sensors
- Remote Sensors
- Clutch Actuator circuit
- Smart Key
- Watchdog Timers
- Internet of Things (IoT)
- Power-On Reset Timer
