DS4155P+ Overview
In this case, the programmable timer's frequency is set to 155.52MHz.It is used to pack in Tube case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 74mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes LVPECL. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: TRI-STATE; ENABLE/DISABLE FUNCTION. On operating frequency, it's available in the range of 155.52MHz. The digital timer has a frequency tolerance value of 0.005%. The number of the chip's terminations sums up to 10. Its subcategory belongs to Other Oscillators. The minimum supply voltage of the chip must not be lower than 3.135V. The supply voltage of this chip should not exceed 3.465V.
DS4155P+ Features
Operate frequency at 155.52MHz
Package / Case: Tube
Max Operating temperature at -40°C
Additional Feature: TRI-STATE; ENABLE/DISABLE FUNCTION
DS4155P+ Applications
There are a lot of Maxim Integrated DS4155P+ Programmable Timers & Oscillators applications.
- Car Door Handle circuit
- Safety and Security Platforms
- Intruder Detection
- Clutch Actuator circuit
- Watchdog Timers
- Remote Sensors
- Always On Systems
- Power-On Reset Timer
- Intruder Detection
- Power-Gating Applications
