DS1830A Overview
There are 8 terminals on this power management that allow it to be mounted. Packaged in the form of a Tube, power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. Several of the benefits of this PMIC are also shared by other Sequencer products. Specifies a reflow peak temperature of 240 for the package during reflow. When 3.3V is applied to the power ic, it conducts. Power management conducts at a voltage of 3. The power management is mounted by a Through Hole-axis. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 8 pins in it. There are 8 pins on the power managment ic. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Through Hole mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 25μA volt supply current. The other features include, for example, [0], which is just one example. You can always use DS1830, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 25μA.
DS1830A Features
Sequencer type
Minimum supply voltage of 1V
25μA operating supply current
DS1830A Applications
There are a lot of Maxim Integrated DS1830A Voltage Supervisors applications.
- Power distribution systems of CCU
- Detection of phase sequence
- Insulation fault location system
- Power distribution systems of ICU
- Fire equipment power monitoring system
- Battery cars
- Embedded computing
- FPGA design
- Satellite navigation
- Power communication system
