DS1231-50/G Overview
A total of 8 terminals are used to mount this power management. Power management is packaged in a Tube way. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management conducts at a voltage of 5V. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Through Hole-axis. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 8 pins. There should be a minimum voltage supply (Vsup) of 4.5V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Through Hole is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For this power management, there is an 2mA volt supply current. To find similar IC managements from the manufacturer, you can always search by DS1231. There is a requirement for 5V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 2mA.
DS1231-50/G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
2mA operating supply current
DS1231-50/G Applications
There are a lot of Maxim Integrated DS1231-50/G Voltage Supervisors applications.
- Smart meter
- Network equipment
- Electric heating appliances
- Solar power charger
- Medical-specific isolation transformer
- Battery-powered equipment
- Refrigeration
- Satellite navigation
- Efficient information transmission
- Rechargeable batteries
