Name: DG419LEUA+
Brand: Maxim Integrated
SKU: DG419LEUA+
Price: 6.33000 USD
Availability: InStock

new-10%

DG419LEUA+

Manufacturer part number:DG419LEUA+

Manufacturer:Maxim Integrated

Description:SPDT 35Ohm Analog Switches DG419 8 Pins 250pA 15V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:DG419LEUA+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1997
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	362mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG419
Pin Count	8
Number of Channels	1
Max Supply Voltage	36V
Min Supply Voltage	9V
Nominal Supply Current	26μA
Max Supply Current	1μA
Turn On Delay Time	300 ns
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	210 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-86dB @ 1MHz
Height	950μm
Length	3.05mm
Width	3.05mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG419LEUA+ Product Details

DG419LEUA+ Overview

Shipping overseas is convenient with the electronic component packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 8. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 8 pins. A SPDT switching circuit is used to build these analog multiplexers. Try searching with DG419 if you're looking for variants. There is 100Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. A voltage higher than 36V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 9V should be the lowest voltage fed to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 1μA. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V.