Name: DG412FEUE+T
Brand: Maxim Integrated
SKU: DG412FEUE+T
Price: 7.31000 USD
Availability: InStock

new-10%

DG412FEUE+T

Manufacturer part number:DG412FEUE+T

Manufacturer:Maxim Integrated

Description:175ns, 145ns SPST - NO 35Ohm Analog Switches DG412 16 Pins 250pA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:DG412FEUE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2002
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	85Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	755mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Base Part Number	DG412
Pin Count	16
Operating Supply Voltage	18V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	9V
Nominal Supply Current	355μA
Max Supply Current	600μA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	15pF 47pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-105dB @ 1MHz
Switch-on Time-Max	175ns
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG412FEUE+T Product Details

DG412FEUE+T Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. In total, 16 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. 16 pins are injected to the electronic part body. The analog switch ics are built using SPST - NO switching circuits. It consists of 4 circuits. DG412 can be used to search for analog multiplexer variants. A 85Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. In a normalsituation, users should not supply the switches with voltage higher than 36V. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 9V should be applied to the electronic component. Putting voltage greater than 600μA on the multiplexer may cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. There is a voltage range of 18V operating voltages for the electrical part.