Name: DG412CJ+
Brand: Maxim Integrated
SKU: DG412CJ+
Price: 12.20000 USD
Availability: InStock

new

DG412CJ+

Manufacturer part number:DG412CJ+

Manufacturer:Maxim Integrated

Description:175ns, 145ns SPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:DG412CJ+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	80Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Base Part Number	DG412
Output	SEPARATE OUTPUT
Pin Count	16
Power Supplies	512/+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	30V
Min Supply Voltage	10V
Operating Supply Current	100pA
Nominal Supply Current	100pA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	10V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	125 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	3 Ω (Max)
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	175ns
Normal Position	NO
Length	19.175mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG412CJ+ Product Details

DG412CJ+ Overview

Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. There are 16 terminations totally. A electrical component with 1 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. It consists of 4 circuits. Search with DG412 if you are looking for analog multiplexer variants. Analog switches have 80Ohm internal resistance. Datasheets for functions of 16 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 30V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 10V. The analogue multiplexer could operate on 100pA current. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using a dual power supply, you should attach at least 4.5V. There are SEPARATE OUTPUT outputs on this analog switch ic.