DG411FEUE+T Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 16. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPST - NC switching circuit is used for these analog switches. The multiplexer consists of 4 circuits. DG411 can be used to search for analog multiplexer variants. There is 85Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. Multiplexers should not be powered above 36V in normal situations. An effective Dual, Single supply digital multiplexer. It is recommended to use 9V as the lowest voltage for the electrical part. Putting voltage greater than 600μA on the multiplexer may cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. In the case of dual power supplies, you should connect at least 4.5V. There is a voltage range of 18V operating voltages for the electrical part.
DG411FEUE+T Features
1 Channels
Switch Circuit: SPST - NC
DG411FEUE+T Applications
There are a lot of Maxim Integrated DG411FEUE+T Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Channel Banks
- Fiber to the Home
- Battery Powered Instruments
- Wireless Local Loop
- USB 1.1 signal switching circuits
- Remote wireless modules
- Precision test equipment
- High speed data transmission line cards
- Multi-Line E1 Interface Cards
