DG200ABA Overview
The electronic part can be shipped overseas conveniently because it is packaged in TO-100-10 Metal Can. In order to provide high reliability, an advanced packaging method Bag is used. Through Hole is where this multiplexer is located. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -25°C~85°C. In total, 10 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 10 series. Multiplexers built on a SPST - NC switching circuit are built. There are 2 circuits in this multiplexer. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 36V volts for the multiplexer. The lowest voltage the electronic part should receive is 9V. For this switch, a dual supply voltage is feasible, but it must not exceed 18VWith dual power supplies, you should attach at least 4.5V. There are SEPARATE OUTPUT outputs on this analog switch ic.
DG200ABA Features
1 Channels
Switch Circuit: SPST - NC
DG200ABA Applications
There are a lot of Maxim Integrated DG200ABA Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Modems
- MP3 players
- Audio signal routing
- New designs requiring multiplexer functions
- High reliability control systems
- FTTH
- Digital cross connects (DSX-1)
- ISDN NT1/TA
- Fault Tolerant Systems
