71M6541FT-IGT/F Overview
I have packed this in Tray. A package named 64-LQFP. A Single Phase meter can be used with it as well. Surface Mount is one of the available options. There is a higher operating temperature at -40°C~85°C. Power is supplied by 3V~3.6V power supply, which allows it to operate. The I/O ports on this PMIC have a voltage of zero on their low-level interfaces. There is a voltage value of 2V on this device as it is designed for high-level I/Os. Parts of the part have 64 terminations on them. An analog ANALOG CIRCUIT IC with strong PMIC capabilities. The normal voltage required for the part is 3.3V. To be able to operate this device, the user should be aware that a voltage of 3V or higher is required in order for it to work. In order to prevent damage to the device, it is important to keep the maximum voltage below 3.6V. In this case, it is a 64 solution for logic gate applications. It is designed to be used as a Surface Mount device for easy installation and dismounting. In this case, it is a Other Analog ICs, which represents a specialized need. A memory chip must have a voltage no greater than 6.9mA to work properly. You can find it in the Single Converter Technology® series. It is possible to supply this device using the 3.3V protocol. There is a possibility of this device working up to a frequency of 5MHz. An integrated memory size 64kB has been incorporated into this PMIC. PMICs use FLASH memory to store data.
71M6541FT-IGT/F Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6541FT-IGT/F Applications
There are a lot of Maxim Integrated
71M6541FT-IGT/F Energy Metering ICs applications.
- Intelligent Power Distribution Units
- Telecom Infrastructure
- Industrial Equipment
- General Purpose Energy Measurement
- Power monitoring/power budgeting
- Central office equipment
- Telecommunications and data communications equipment
- PCs/servers
- Power monitoring instruments
- Poly-phase energy meters of class 0.5S and class 1
