71M6541F-IGT/F Overview
It was packaged in Tray. It is packaged in the 64-LQFP format. It is also capable of being used as a Single Phase meter. The following version of Surface Mount is available. Optimal operation is achieved at -40°C~85°C at a higher temperature. There is a 3V~3.6V power supply that powers the device. For more parts that are similar to this, search 71M6541. The PMIC comes equipped with low-level I/O ports that have a voltage of 0.8V. When using this device for high-level I/Os, the voltage presented by it is 2V. There are 64 terminations included in this part. An analog ANALOG CIRCUIT IC for PMICs. There is a normal voltage needed for the part, which is 3.3V. There is a need for users to be aware that this device can be operated only with a voltage level of 3V or higher. There should be no greater than 3.6V voltage applied to the device at any time. The 64 pins are connected by 64 pins. Logic gate applications are made possible by this 64 solution. Specifically, this is a Other Analog ICs for specialized needs that needs to be taken care of. To function properly, the memory chip must operate at a voltage not greater than 8.7mA. Several Single Converter Technology® series models have this feature included in them. There are a number of ways in which this device can be supplied using 3.3V. As far as frequency is concerned, this device can operate up to 5MHz. In this PMIC, there is a memory size 64kB incorporated into it. As part of its design, the PMIC utilizes FLASH memory.
71M6541F-IGT/F Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6541F-IGT/F Applications
There are a lot of Maxim Integrated
71M6541F-IGT/F Energy Metering ICs applications.
- Intelligent Power Distribution Units
- Telecom Infrastructure
- Industrial Equipment
- General Purpose Energy Measurement
- Power monitoring/power budgeting
- Central office equipment
- Telecommunications and data communications equipment
- PCs/servers
- Power monitoring instruments
- Poly-phase energy meters of class 0.5S and class 1
