71M6534H-IGT/F Overview
I have packed this in Tray. A package named 120-LQFP. A 3 Phase meter can be used with it as well. Surface Mount is one of the available options. There is a higher operating temperature at -40°C~85°C. Power is supplied by 3V~3.6V power supply, which allows it to operate. You can find more similar parts by searching 71M6534. The I/O ports on this PMIC have a voltage of zero on their low-level interfaces. There is a voltage value of 2V on this device as it is designed for high-level I/Os. Parts of the part have 120 terminations on them. An analog ANALOG CIRCUIT IC with strong PMIC capabilities. The normal voltage required for the part is 3.3V. To be able to operate this device, the user should be aware that a voltage of 3V or higher is required in order for it to work. In order to prevent damage to the device, it is important to keep the maximum voltage below 3.6V. There are 120 pins that are joined together. In this case, it is a 120 solution for logic gate applications. In this case, it is a Other Analog ICs, which represents a specialized need. A memory chip must have a voltage no greater than 9.6mA to work properly. You can find it in the Single Converter Technology® series. It is possible to supply this device using the 3.3V protocol. There is a possibility of this device working up to a frequency of 10MHz. An integrated memory size 256kB has been incorporated into this PMIC. PMICs use FLASH memory to store data.
71M6534H-IGT/F Features
3 Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 10MHz.
256kB adequate size for target applications.
FLASH memory.
71M6534H-IGT/F Applications
There are a lot of Maxim Integrated
71M6534H-IGT/F Energy Metering ICs applications.
- Intelligent Power Distribution Units
- Telecom Infrastructure
- Industrial Equipment
- General Purpose Energy Measurement
- Power monitoring/power budgeting
- Central office equipment
- Telecommunications and data communications equipment
- PCs/servers
- Power monitoring instruments
- Poly-phase energy meters of class 0.5S and class 1
