LTC6946IUFD-1#PBF Overview
It is packaged using the Tube method since it is a clock IC. A Clock PLL is included with the 28-WFQFN Exposed Pad package. It contains a total of 28 terminations within RF synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This clock generator receives its inputs from Clock, which is designed to be the clock source. It is possible to access the full performance of the electrical part by implementing 1 circuits. Because of the Surface Mount, clock PLL can be easily mounted on the panel. This clock generator would require a maximum supply voltage of 3.45V. As long as you provide 3.15V~5.25V supply voltage, it will work. Based on the test statistics, an ambient temperature of -40°C~105°C should be set. This is an electronic part that can be classified as a Clock/Frequency Synthesizer (RF/IF), Integer N in this case. The clock-generating IC is a 28-bit device designed specifically for microprocessors. The related electronic parts of part number LTC6946 are listed below. There is an available 28 pin on the clock generators. Supply voltage 3.3V is what time clock generator can handle. PLL or Frequency Synthesis Circuits-type frequency generators are usually classified as this type. With ALSO OPERATES IN SUPPLY VOLTAGE 4 TO 5.25V, this clock generator produces better clock signals. Frequency generator is able to reali3.74GHze high efficiency when operating at a frequency of 3.74GHz.
LTC6946IUFD-1#PBF Features
Available in the 28-WFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
LTC6946IUFD-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6946IUFD-1#PBF Clock Generators applications.
- Peripheral devices
- Integrated phase noise in aerospace systems
- High-speed optical transport network (OTN)
- Cellular/4G
- Microwave radio
- FPGA and processor clocks
- Skew suppression
- Signal frequency synthesis circuits
- Frequency synthesis
- Antenna automatic tracking
