LTC6263IMS#TRPBF Overview
The linear amplifier is packaged in a 16-TFSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 16. There are a total of 10 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 16 pins are present on the instrumentation amplifier. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . On this buffer amplifier, there are 4 circuits. On the output type, there are Rail-to-Rail different types of op amps. It is recommended that you use an 245μA power supply with this electrical part in order for it to operate correctly.
LTC6263IMS#TRPBF Features
10 Pins
supply voltage of 1.8V
Output Type: Rail-to-Rail
LTC6263IMS#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6263IMS#TRPBF Instrumentational OP Amps applications.
- Division circuits
- Strain gauges
- Signal filtering
- Radiation thermometry transducers
- Car stereo
- Fast A/D and D/A converters
- Instrumentation
- Differentiator circuits
- Signal operation
- Inverse/same-phase proportional circuit
