LTC4313IDD-3#PBF Overview
As a convenience to the user, power buffer has been packaged in 8-WFDFN Exposed Pad.The package is ready for power buffer in Tube pieces.The Surface Mount universal mout allows for easy adaptability to a variety of situations.As far as types are concerned, this is just a typical Buffer, Accelerator.For its operation, this op amp buffer uses a voltage of 2.9V~5.5V.Input of 2-Wire Bus is enabled by it.To avoid malfunctions, you should set the operating temperature to -40°C~85°C.It is aimed at applications related to the I2C - Hotswap and other areas.For more pin-to-pin solutions, try "LTC4313".An op amp buffer with 8 terminals can be found.The peak reflow temperature of the power buffer is NOT SPECIFIED.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.The pinout of a Power buffer begins with the 8 pins of the Power buffer that it possesses.2-Wire Bus is the output format.There are 8 pins on it.This board has a Surface Mount hole for mounting on a PCB or other board.There is a voltage of 8.1mA which is used to power this power buffer.You are not supposed to feed the repeter with voltage higher than 5.5V.To start it up, the splitter will need 2.9V at least.In this repeater signal, 1 receivers are implemented.
LTC4313IDD-3#PBF Features
Mainly used in I2C - Hotswap.
LTC4313IDD-3#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4313IDD-3#PBF Signal Buffers, Repeaters, Splitters applications.
- PECL-to-LVDS Translation
- Medical
- Add/Drop Muxes
- Digital Cross-Connects
- Backplane Interconnect
- Clock Distribution
- Cable Repeaters
- Industrial Server
- Industrial/Embedded PC
- Data or Clock Signal Amplification
